复旦团队做了个会“从地面偷电”的机器人脚垫,不用再背电池

林越2026-10-081501机器人零部件

研究人员开发了一种纸片薄的足部膜片,让爬行微型机器人直接从脚下的地面收集电力,不再依赖沉重的机载电池,而是把金属和硅表面变成主动电源。微型机器人可以穿过瓦砾寻找地震幸存者,或检查核反应堆最狭窄的缝隙,但它们最大的障碍仍然非常普通:电力。传统的商用电池太笨重,一台1.7克的机器人如果不把电池做到占总重量94%这种不切实际的程度,大约两分钟就会烧毁。

 

Researchers have developed a paper-thin foot membrane that allows crawling micro-robots to harvest electricity directly from the ground beneath their feet, no longer relying on heavy onboard batteries, but instead turning metal and silicon surfaces into active power sources. Micro-robots could crawl through rubble to find earthquake survivors, or inspect the narrowest crevices of nuclear reactors, but their biggest obstacle remains remarkably ordinary: power. Conventional commercial batteries are too bulky, and a 1.7-gram robot would burn out in about two minutes unless the battery were made to account for an unrealistic 94% of its total weight.

把地面变成电源


复旦大学的研究团队完全绕开了机载存储,把机器下方的地面变成了电源。在发表于《国家科学评论》的研究中,团队展示了一种柔软、纸片薄的膜片,附着在机器人的脚垫上,当它踩过铝、锌或硅等活性表面时,就能即时发电。该系统有效地把每一步都变成了瞬时的电化学发电机。机制依赖于一种只有135微米厚的聚合物凝胶片,大约是人类头发的直径,直接化学生长在机器人的脚上。当脚接触兼容表面时,它表现得像一个开放式电池。金属地板提供电子,而膜片从周围空气中吸收氧气和水分来完成电路。电力在接触时立即流动,抬脚瞬间切断。

 

Turning the ground into a power source

 

A research team at Fudan University completely bypassed onboard storage and turned the ground beneath the robot into a power source. In a study published in National Science Review, the team demonstrated a soft, paper-thin membrane attached to the robot's foot pads that generates electricity on the spot when it steps across active surfaces such as aluminum, zinc, or silicon. The system effectively turns each step into an instantaneous electrochemical generator. The mechanism relies on a polymer gel sheet only 135 micrometers thick, about the diameter of a human hair, grown chemically directly on the robot's feet. When the foot contacts a compatible surface, it behaves like an open-cell battery. The metal floor provides electrons, while the membrane absorbs oxygen and moisture from the surrounding air to complete the circuit. Electricity flows immediately upon contact and is cut off the instant the foot is lifted.

 

跑了百万步只消耗2克铝


在实验室试验中,一台3D打印的爬行机器人尺寸为6.7乘5.7厘米,断断续续跑了150天,超过1万步没有出现电压下降。它最终跨过百万步大关,只消耗了约2克铝。这种粘性凝胶膜甚至允许机器人攀爬倾斜的金属板,它经受住了零下20摄氏度到80摄氏度的温度,并成功为一颗机载LED和蓝牙发射器供电。

 

A million steps with only 2 grams of aluminum consumed

 

In laboratory tests, a 3D-printed crawling robot measuring 6.7 by 5.7 centimeters ran intermittently for 150 days and more than 10,000 steps without any voltage drop. It eventually crossed the million-step mark while consuming only about 2 grams of aluminum. The sticky gel membrane even allowed the robot to climb inclined metal plates, withstood temperatures from minus 20 degrees Celsius to 80 degrees Celsius, and successfully powered an onboard LED and Bluetooth transmitter.

 

局限性


这个概念并非没有现实约束。脚垫无法从化学惰性表面如塑料、玻璃、土壤或有机组织提取能量,这促使团队添加了一个小的机载超级电容器来在死区缓冲电力。关键的是,暴露于大气二氧化碳和持续腐蚀会逐渐降解内部电解质,需要研究人员手动补充氢氧化钾来维持运行。这一突破正值更广泛的多功能合成皮肤研究推进之际。世界各地的机器人专家正在把外层涂层变成传感网络,从斯坦福大学的自修复分层皮肤,到剑桥和伦敦大学学院的痛觉感应柔性水凝胶,再到Generative Bionics的Gene.01人形机器人,它能感知触摸和热接近,以便与人类安全共处。在东京大学,研究人员甚至在机器人手指上生长了活体人类皮肤,让它自然起皱,并用胶原蛋白愈合伤口。通过把合成皮肤从被动传感器升级为能量收集器,复旦团队提供了一种替代死重电池的巧妙方案。如果研究人员能够自动化电解质维护,微型探索者也许终于能永久切断脐带,安静地爬过通风井、变电站和核反应堆,在源头收集关键诊断数据。

 

Limitations

 

The concept is not without real-world constraints. The foot pads cannot extract energy from chemically inert surfaces such as plastic, glass, soil, or organic tissue, which prompted the team to add a small onboard supercapacitor to buffer power during dead zones. Crucially, exposure to atmospheric carbon dioxide and continuous corrosion will gradually degrade the internal electrolyte, requiring researchers to manually replenish potassium hydroxide to sustain operation. This breakthrough comes as broader research into multifunctional synthetic skin advances. Roboticists around the world are turning outer coatings into sensing networks, from Stanford University's self-healing layered skin, to pain-sensing flexible hydrogels at Cambridge and University College London, to Generative Bionics' Gene.01 humanoid robot, which can sense touch and thermal proximity in order to coexist safely with humans. At the University of Tokyo, researchers have even grown living human skin on robotic fingers, allowing it to wrinkle naturally and heal wounds with collagen. By upgrading synthetic skin from a passive sensor into an energy harvester, the Fudan team has offered an ingenious alternative to dead-weight batteries. If researchers can automate electrolyte maintenance, micro-explorers may finally be able to permanently cut the cord and quietly crawl through ventilation shafts, substations, and nuclear reactors, collecting critical diagnostic data at the source.